RME ADI-2 FS High-Precision 192 kHz 2-Channel AD/DA Converter

Availability: 19 in stock

DA: Signal to Noise ratio (SNR): 117 dB RMS unweighted, 120 dBA Frequency response @ 44.1 kHz, -0.1 dB: 10 Hz – 20.2 kHz Frequency response, -0.5 dB: 5 Hz – 44.9 kHz Frequency response @, -1 dB: 3 Hz – 88 kHz THD @ -1 dBFS: -112 dB, 0.00025 % THD+N @ -1 dBFS: -110 dB, 0.00032 % THD @ -3 dBFS: -116 dB, 0.00016 % Channel separation: > 110 dB Ma, 1/4" TRS unbalanced/balanced Output impedance, TS unbalanced 100 Ohm Output level switchable, +13 dBu, +19 dBu @ 0 dBFS

Digital I/O: Digital input coaxial ground-free transformer coup, RCA (SPDIF, AES/EBU compatible) Format Consumer SPDIF acc

DA - Phones: Output: 6.3 mm stereo TRS, unbalanced Output impedance: 0.1 Ohm Outp, load 100 Ohm or up: +19 dBu (6.9 Vrms) Max po, +16 dBu, 4.9 Vrms) THD 32 Ohm load @ +15 dBu: -110 dB, 0.0003 %

Condition: Open box

Mode ANA (Analog In to Analog Out): Signal to Noise ratio (SNR) @ +19 dBu: 123 dB RMS, 126 dBA Signal to Noise ratio (SNR) @ +13 dBu, 122 dBA Signal to Noise ratio (SNR) @ +4 dBu:, 115 dBA Frequency response -0.5 dB: 1 Hz – 12, 0.00016% Channel separation: > 120 dB Max

SPDIF coaxial: RCA, according to IEC 60958 High-sensitivity input, Professional 1.4 V Single Wire mode, sample rate 28 kHz up to 200 kHz

Type: Audio Interface

DIGITAL: Clocks: Internal, ADAT In, SPDIF In Jitter suppression of external clock, even at more than 100 ns jitter Digital Bitcl, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176, 8 kHz, 192 kHz

Brand: RME

General: Included power supply: external switching PSU, 100 - 240 V AC, 2 A, 24 Watts Idle power consumption: 5, 2 W (430 mA @ 12V) Max. power consumption: 10, non condensing

MPN: ADI-2 FS

Form Factor: AD/DA Converter

Analog AD: Signal to Noise ratio (SNR) @ +19 dBu: 117 dB RMS, 121 dBA Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.5 kHz Frequency response @, -0.5 dB: 3 Hz – 45.5 kHz Frequency response @, -1 dB: 2 Hz – 92.7 kHz THD @ -1 dBFS: -114 dB, 0.00015 % THD+N @ -1 dBFS: -112 dB, 0.00025 % Channel separation: > 110 dB Ma, electronically balanced Input impedance balan, unbalanced: 18 kOhm Input sensitivity switcha, +13 dBu, +19 dBu @ 0 dBFS

UPC: 4260123363239

SPDIF optical: 1 x optical, according to IEC 60958 Sample rate 28 kHz up

ADAT: TOSLINK Standard: 8 channels 24 bit, up to 48 kHz Double Speed (S/MUX): 4 channels